HOTDIVE
LP Braided Regulator Hose – Inline Swivel
$31.90
Length
Color
Back in stock
Notify me
when available
LP Braided Regulator Hose – Inline Swivel — we'll email you the moment it's back in stock.
No spam. We'll only email you about this item.
01. Info
The LP Braided Regulator Hose – Inline Swivel connects a regulator second stage to a first-stage low pressure port. Its braided outer is lighter and more flexible than rubber and packs smaller for travel, and it comes in ten colors. On this model, an inline swivel rotates around the connection axis without changing the hose exit angle, so the hose follows your body and takes torque off the fitting and O-rings. 11 stock lengths from 50 to 210 cm cover everything from a necklace backup to a long hose, and other lengths can be made to order.
02. Features
- Braided outer — lighter and more flexible than rubber, packs small for travel
- Inline Swivel — rotates around the connection axis without changing the hose exit angle, so the hose follows your body and takes torque off the fitting and O-rings
- Rated for regulator LP ports — 30 bar / 430 psi working, 120 bar / 1700 psi burst
- Ten colors — tell primary, octopus and long hose apart at a glance
- 11 stock lengths, 50–210 cm — from a necklace backup to a 210 cm long hose
03. Lengths
- 50 cm — Short hose · shorter: necklace backup with a tighter route
- 56 cm — Short hose · popular: necklace backup, close to the 22″ short-hose size
- 60 cm — Short hose · popular: necklace backup, close to the 24″ short-hose size
- 65 cm — Short hose · extended: longer necklace backup and some sidemount short-hose setups
- 70 cm — Primary · shorter: compact primary routing
- 75 cm — Primary · popular: standard recreational primary
- 80 cm — Primary · popular: the other common primary length
- 85 cm — Primary · extended: primary with more routing slack
- 95 cm — Octopus · shorter: a shorter alternative to the 100 cm octopus
- 100 cm — Octopus · popular: standard recreational octopus
- 210 cm — Long hose · popular: primary long hose in a long-hose / short-hose configuration
- 15 and 20 cm regulator hoses are custom-only. Looking for a hose that short? You probably need a BCD inflator hose — check what it connects to before ordering
- Other lengths can be made to order
- All lengths are measured by hand and may vary by ±2 cm
04. Specifications
- Connection: first-stage LP port → second stage
- Working pressure: 30 bar / 430 psi
- Burst pressure: 120 bar / 1700 psi
- Inner diameter: 6.5 mm
- Outer diameter: 12 mm
- Custom lengths available on request
05. Options
- Length: 50 cm, 56 cm, 60 cm, 65 cm, 70 cm, 75 cm, 80 cm, 85 cm, 95 cm, 100 cm, 210 cm
- Color: Black, White, Red, Yellow, Green, Pink, Purple, Royal Blue, Lake Blue, Black Gray